do88 Intercooler Third Gear Pull Data

do88 IAT Logs

The do88 intercooler that was flow tested has been sitting in the box while I’ve contemplated other tests that I can perform with it outside of a GTI.

do88 Intercooler for Mk7 GTI
do88 Intercooler for Mk7 GTI

In the meantime another GTI owner who has installed the do88 provided some datalogs showing how it performs in a fairly demanding setup.

The car is a Mk7 GTI equipped with the EQT Vortex XL turbocharger.  Performance during third gear pulls is shown in the charts below:

do88 Intercooler Third Gear Pull Data
do88 Intercooler Third Gear Pull Data
do88 Intercooler Third Gear Pull Data
do88 Intercooler Third Gear Pull Data (2)
do88 Intercooler Third Gear Pull Data
do88 Intercooler Third Gear Pull Data (3)
do88 Intercooler Third Gear Pull Data
do88 Intercooler Third Gear Pull Data (4)

 

6 thoughts on “do88 IAT Logs”

  1. Scott Huang

    Awesome. Thanks for the good info as always.

    Jeff, I’m switching from a CTS FMIC to a do88 intercooler with the big pack hoses whenever it arrives from Sweden. Currently running an EQT XL as well.

    I wanted to know if I could contribute information somehow on either of these perhaps a before and after. (short of shipping the CTS :P)
    I have a Cobb Accessport, and a VCDS. Let me know if I can help in any way!

    1. Hey Scott, that would be helpful to see how the do88 performs on another car. After you get it installed touch base and I’ll work with you to post the results that you record. Accessport will give better resolution than VCDS.

    2. Scott,

      Would love to hear your thoughts once you install the do88 IC. I read one case that the only issue that came up during install was a portion of upper passenger side AC Condenser tab was trimmed for fitment.

      1. I’m hoping in the next few weeks to have the opportunity to test it on the GTI.

      2. Scott Huang

        I’ll let you know. In the install instructions you do need to trim some tabs because the intercooler is so large

        1. Thanks it will be a few weeks before I get around to installing the do88, I’ll be interested in hearing how it goes for you.

Comments are closed.