Lader LM440-IS20 Re-Install

Background:

With the Mabotech M600 testing objectives accomplished, I removed the turbo and reinstalled the Lader LM440-IS20 I had used briefly about a year and a half ago.

Lader LM440-IS20 Turbocharger Installation
Lader LM440-IS20 Turbocharger Installation

The LM440-IS20 is an IHI IS20-based hybrid manufactured in Germany by Lader Manufaktur and features larger turbine and compressor wheels, a different core with upgraded bearings, and adapters for connection to the OEM oil and coolant lines.

In static flow tests, the LM440-IS20 hot side produced slightly more airflow than the IHI IS20 turbine.

Lader LM440-IS20 Turbine Housing Flow Test
Lader LM440-IS20 Turbine Housing Flow Test

Sensor Addition:

Along with the turbocharger installation, I added a Mk8 PCV pressure sensor, which I purchased before the last LM440 installation but hadn’t gotten around to installing until now.

Mk8 PCV Pressure Sensor
Mk8 PCV Pressure Sensor

The goal of adding the pressure sensor is to revisit measuring the crankcase and PCV vacuums with different inlet elbows. In 2024, I briefly logged crankcase pressure with the APR catch can and then the Mk8 PCV.

LM440-IS20 Crankcase Vacuum Measurement
LM440-IS20 Crankcase Vacuum Measurement

This setup will retain the turbine inlet pressure sensor, allowing me to compare exhaust system back pressure with the Shuenk IS48 (IS38 turbine) and Mabotech M600 turbochargers.

References: